Auto Dialler - BOX C - Pit Emergency Telephone System
Product Code: A-AA-047
Product Description
Emergency telephone system.
Designed to be installed in the pit area.
Must be connected to an analogue landline or GSM Gateway unit. No power supply required. Power is generated from the landline or GSM Unit
Unit consists of Loud speaker, Microphone, Alarm Button + mechanics presence.
- Conforms to European standards EN81-28 and EN81-70*
- Voice module integrated
- Powered by analogue phone line or GSM gateway
- Multi frequency dialing
- Automatic Hook
- Automatic answer
- Automatic or manual calibration of volume and gains
- Recognition of the call location
- Installation identification sent to your call centre. You just need to install our free 100% open protocol in your call centre.
- Programmable by 12 key keypad
- 1 dual function key : passenger trapped acknowledge and test call to ANEP voice server
- 1 key for technician alarm
- Up to 6 telephone numbers may be stored
- Automatic calling of a 2nd number if the 1st is engaged or doesn’t answer
- EEPROM memories without battery nor maintenance
- Programmable remotely via our 100 % open protocol that is offered free and you install at your call centre.
The 'Installation solutions' pdf files shown below are designed to help you select the correct products for your various installation requirements. If you need any help for other configurations then please do not hesitate to call our technical team.