PR2500-UD-V35 - Progressive Bi Directional Safety Gear
Product Code: DYN/PR-2500-V35
Product Description
Acting: UPWARDS &DOWNWARDS
Guide rail type: COLD DRAWN OR MACHINED OILED
Admissible guide rail thickness: 7mm to 16mm
According to the standards: EN 81-20 and EN 81-50.
Minimum gripping width: 25 mm
Admissible guide rail thickness: From 7 to 16 mm
Maximum tripping speed: 2,5 m/s
(P+Q) Maximum permitted:
Min. P+Q = 613 Kg (-7,5%)
Max. P+Q = 1955 Kg (+7,5%)
P+Q Range Available: 613KG, 711KG, 826KG, 929KG, 1041KG, 1146KG, 1274KG, 1276KG, 1424KG, 1572KG, 1759KG, 1955KG
Guide rail type: COLD DRAWN / OILED
Gripping width: 20 mm
Admissible guide rail thickness: 8 mm
Maximum tripping speed: 1,5 m/s
(P+Q) Maximum permitted: P+Q= 671 Kg (+/-7,5%)
P+Q Range Available: 671KG
T2 Assembly adjustable between 600mm to 4000mm.
Safety switch
Used with the following products:
PR-2500-UD-V35
P = Contract Load
Q = Car Weight
To order the correct safety gear, we require the contract load plus the car weight.
THE CAR WEIGHT MUST BE ACCURATE.
A complete assembly consists of the following items.
· 1 x Set of Safety Gear Blocks
· 1 x Appropriate T Bar Assembly
· 1 x Safety Gear Switch.
To order the correct safety gear you will need to know the following
· Contract Load = P
· Car Weight. = Q
· DBG Measurement (Distance Between Guides)
· Guide Rail Thickness 7-16mm
When ordering the T3 Assembly, please confirm your Distance Between Guides
Note: V35 Safety Gear Blocks are 210mm long, V50 Safety Gear Blocks are 258mm Long
Optional Extra: RENO SUPPORT SYSTEM.
The RENO support system for new or existing (renewed) frames is formed by two braces that support all Dynatech progressive safety gear and their associated linkage. The installation of the most common slide or roller guide shoes sold commercially is also accepted. Suitable for the entire range of PR, PQ and ASG progressives, with their associated linkage T1, T2, T3, T25 and T25 UD For further details and prices please refer to product code RENO