Retiring Cam Unit - Motorised Version - RKMO

Product Code: RKMO-24VDC

Members - please login for prices

How to use Order Form?

Product Description

Technical Information:

The RKMO retiring cam unit is motor-driven and runs almost silent when unlocking and locking. The cam is available in a 24VDC version or as a 100-250VDC/AC wide-range voltage input. This new motorised retiring cam is also characterised by low power consumption, with a high actuation force and a large adjustable stroke.

Features:

  • Drive with maintenance-free three-phase motor
  • High actuation forces up to 65 N
  • Especially low total height of only 50 mm
  • Large stroke up to 50 mm, adjustable
  • Suitable for all Dewhurst Gatelocks.
  • Energy-saving due to low power requirement of only 1 A at 24 V and reduced Holding current
  • Duty cycle of any length (100 % duty cycle)
  • Hardly perceptible unlocking and locking of the landing doors due to low noise emission ‚Äč

IMPORTANT NOTE:

All Kronenberg retiring ramps are manufactured to order. Once ordered they can only be returned for faults resulting from the manufacture. All manufacturing faults must be reported within 5 days of receipt or Kronenberg will not allow them to be returned. A credit will be issued after the item has been returned to Kronenberg and deemed to be a fault of manufacture. All items that are deemed to have been damaged by the customer will be returned and a credit will not be issued. A full report from Kronenberg will be made available at this point.

Lead time on most retiring ramps will be approx 4-6 week from placement of order.

Technical Data:

Dust Cycle: 100%
Total Height: Energised / Retracted: 50mm , Current less / Dropped: 75 - 100mm adjustable
Stroke: 25 - 50mm adjustable
Actuation Force: 65N
Ambient Air Temperature: -10 °C up to +45 °C
Customary Position: Vertical, motor drive above

RKMO - 24DC:
Nominal Voltage: 24VDC stabilized / regulated
Admissible Voltage Range: 21V up to 30V
Peak Voltage: 36V
Pull-in / Holding Current: 1A / 0.25A
Connection: 2m connection cable, 2 x 1mm²
Level of Protection: IP00 (safety extra-low voltage)
Weight 2.7kg

RKMO - 230V:
Nominal Voltage: 100V - 250VAC or DC (rectified alternating voltage)
Input Current: 0.4A at 230VAC
Connection: 2m connection cable, 2 x 1mm²
Level of Protection: IP20, insulated
Weight: 2.9kg