P4GU - 4G GSM Gateway Unit
Product Code: A-EA-026
Product Description
P4GU - 4G GSM Gateway Unit
Elevator Equipment, in partnership with ANEP, are proud to offer a brand new 4G GSM unit. This is one of the leading GSM units in the market today with all the latest features including 2W transmission power and configurable by SMS and phone line.
The P4GU is capable of connectiong to 4G networks for a stronger and more reliable signal compared to the standard 2G based PGU unit.
Replacement 'NiMH AAA 800mAh 7.2V' battery backup available from the drop down box.
Technical Information:
- Sim Card Size: 2FF (Sim Card not supplied)
- Ideal for use with our BOX TA, TA+, TX, TX+, S-BOX and all other remote alarms on the market using the coding "Full DTMF" for data transmission.
- Installation in machine room (high) or in the shaft (low machinery) according to the state of the GSM network
- Configurable locally by phone
- Configurable by SMS
- Lift Fleet Management facilitated by routing 5 programmable telephone numbers by SMS
- Local programming via DTMF tones;
- Remote programming via SMS;
- Display of caller identification;
- Country setting;
- CLIP / CLIR;
- Roaming setting;
- Low-battery check
- Power failure control
- Low-battery, power failure/restore notification via SMS;
- Measurement of GSM signal level;
- Automatic converter of selected telephone number
- Receiver and transmitter gain adjustment;
- Remote reboot function;
- GSM signal indicator LED;
- Status indicator LED;
- Line status indicator LED / Data transmission indicator LED
- Power supply status indicator LED;
- Dual Band GSM module;
- 2W transmission power;
- 12Vdc power supply input;
- 230Vac external adapter input;
- External antenna standard cable length = 2m - (Optional 10m cable available.)
- External adapter (230Vac 50Hz input; 12Vdc 1A output).
- Dimensions : 29 x 139 x 91 mm
Technical Characteristics:
• Supplied standard with Antenna 2m (Optional extra: 10 m - Please use drop down box to select): Connector SMA 50 Ohm, 870-960 MHz / 1710-1990 MHz
• Line voltage (Tel no hook.): 52 V DC
Power:
Integrated battery back up : + 1 hour call + 8 hours standby
• External power : 10 -17 Vdc
• Power consumption : 30 mA/12 V
• Ongoing call < 115 mA
• Supervision by SMS of the power supply
• Supervision by SMS of the battery voltage