The EM17-IP65 electromagnetic retiring cam is suitable for installations for which a special dust- and water protection is required. Due to the use of stainless steel parts the cam is better protected against corrosion, but has a slightly lower actuation force.
- High dust and water protection, rated to IP64
- High corrosion protection, all steel parts made of stainless steel
- Quiet operation due to high absorption at switch on and switch off
- Automatic switching to reduce holding current
- Robust and precise
All Kronenberg retiring ramps are manufactured to order. Once ordered they can only be returned for faults resulting from the manufacture. All manufacturing faults must be reported within 5 days of receipt or Kronenberg will not allow them to be returned. A credit will be issued after the item has been returned to Kronenberg and deemed to be a fault of manufacture. All items that are deemed to have been damaged by the customer will be returned and a credit will not be issued. A full report from Kronenberg will be made available at this point.
Lead time on most retiring ramps will be approx 6-8 week from placement of order.
Dust Cycle: 100%
Actuation Force: 45N
Pull-In / Holding Current: 1.0A / 0.28A
Connection: Screw terminal with earthing bolt M4, cable gland
Level of Protection: IP65
Ambient Air Temperature:0 °C up to +40 °C (version for temperatures < 0 °C on request)
Customary Position: Magnet keeper vertical, in down direction