Auto Dialler - BOX-M - Intercom System For The Machine Room
Product Code: A-AA-035
Product Description
BOX-M Module is an intercom system that allows communication between...
- Machine room and top of car
- Machine room and inside of car
- Machine room and pit
- 'Firemans square' module at main floor landing and inside the car.
Complies with codes regarding
- Firemans Square
- Lifts with travel higher than 30m
- Lifts with remote machine room (ie hydraulic lifts)
- Codes EN81-1 / EN81-2 / EN81-72
Designed to be installed in the machine room or inside landing panel, depending on the lifts configuration.
Connections between devices are carried out by 2 electric wires, preferably shielded to avoid any external interference.
BOX-M is designed to work with all ANEP products including BOX-TA (car roof module), BOX-C (pit module) and firemans square. It can be connected directly to an analogue land line or our GSM Gateway unit (code A-EA-013)
It allows for the coupling of 3 emergency voice points with a firefighter intercom, on a single telephone line.
The firefighter intercom communications take priority over all phases of intercom and communication.
The 'Installation solutions' pdf files shown below are designed to help you select the correct products for your various installation requirements. If you need any help for other configurations then please do not hesitate to call our technical team.
SOLD COMPLETE WITH ALIM TMS 12V 1A POWER SUPPLY.